[odc] Daily src changes for 2005-04-24

[ODC]

OpenBSD src changes summary for 2005-04-24
==========================================

distrib/sets                            distrib/zaurus
kerberosV                               sbin/sysctl
share/man                               sys/arch/arm/arm
sys/arch/arm/include                    sys/arch/hp300/dev
sys/arch/mac68k/dev                     sys/arch/zaurus/dev
sys/dev/ic                              sys/dev/microcode
sys/net                                 usr.bin/cvs
usr.sbin                                usr.sbin/tcpdump
usr.sbin/ztsscale                       

== distrib =========================================================== 01/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/distrib

sets

  ~ lists/base/md.alpha                   ~ lists/base/md.amd64
  ~ lists/base/md.cats                    ~ lists/base/md.hppa
  ~ lists/base/md.hppa64                  ~ lists/base/md.i386
  ~ lists/base/md.macppc                  ~ lists/base/md.mvmeppc
  ~ lists/base/md.sgi                     ~ lists/base/md.sparc64

  > sync (deraadt@)

  ~ lists/base/md.zaurus                  

  > sync (deraadt@)

  ~ lists/man/mi                          

  > sync (deraadt@)

zaurus

  ~ ramdisk/install.md                    ~ ramdisk/list

  > run ztsscale at md_congrats time, krw ok (still needs testing) (deraadt@)

== kerberosV ========================================================= 02/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/kerberosV

kerberosV

  ~ src/lib/krb5/kerberos.8               ~ src/lib/krb5/krb5_address.3
  ~ src/lib/krb5/krb5_aname_to_localname.3
  ~ src/lib/krb5/krb5_data.3              ~ src/lib/krb5/krb5_get_krbhst.3
  ~ src/lib/krb5/krb5_krbhst_init.3       ~ src/lib/krb5/krb5_kuserok.3
  ~ src/lib/krb5/krb5_set_default_realm.3

  > A bunch of small fixes, both mdoc and english.
  > ok jmc@ and beck@ (biorn@)

== sbin ============================================================== 03/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/sbin

sysctl

  ~ sysctl.c                              

  > Do down-sampling of the high-resolution touch pad events in kernel,
  > and provide sysctls for fine-tuning the touch pad area that covers the
  > screen.  Reasonable defaults are provided, but each machine can be a
  > bit different due to the manufacturing process. (uwe@)

  ~ sysctl.c                              

  > it is nice if this compiles on other systems (deraadt@)

== share ============================================================= 04/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/share

man

  ~ man4/fxp.4                            

  > document additional firmware (deraadt@)

  ~ man4/man4.zaurus/zts.4                

  > Xr ztsscale and describe why (deraadt@)

== sys =============================================================== 05/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/sys

arch/arm/arm

  ~ arm32_machdep.c                       

  > Do down-sampling of the high-resolution touch pad events in kernel,
  > and provide sysctls for fine-tuning the touch pad area that covers the
  > screen.  Reasonable defaults are provided, but each machine can be a
  > bit different due to the manufacturing process. (uwe@)

arch/arm/include

  ~ cpu.h                                 

  > Do down-sampling of the high-resolution touch pad events in kernel,
  > and provide sysctls for fine-tuning the touch pad area that covers the
  > screen.  Reasonable defaults are provided, but each machine can be a
  > bit different due to the manufacturing process. (uwe@)

arch/hp300/dev

  ~ dnkbd.c                               

  > Oops, 1.3 would cause a keyboard plugged at boot time to start in the wrong
  > state... (miod@)

arch/mac68k/dev

  ~ asc.c                                 ~ ascvar.h

  > - switch Scott Reynold's copyright to 3-clause BSD
  > - do not attach on the MacTV, fix base address on the IIfx (untested)
  > - no need to count sc->sc_ringing up, just set to 1 if ringing; timeout fix
  > ok miod@
  > from NetBSD (martin@)

arch/zaurus/dev

  ~ zts.c                                 

  > Do down-sampling of the high-resolution touch pad events in kernel,
  > and provide sysctls for fine-tuning the touch pad area that covers the
  > screen.  Reasonable defaults are provided, but each machine can be a
  > bit different due to the manufacturing process. (uwe@)

dev/ic

  ~ an.c                                  

  > - fix and update comments
  > - use ETHERTYPE_IP instead of magic value
  > - saanp -> type_ipv4
  > From FreeBSD
  > ok mickey@ (brad@)

  ~ fxp.c                                 ~ fxpreg.h

  > add microcode to support interrupt mitigation on the
  > 82551 F stepping chipset.
  > From FreeBSD via Dmitry Bogdan <dsb at imcs dot dvgu dot ru> (brad@)

dev/microcode

  ~ fxp/Makefile                          ~ fxp/build.c
  ~ fxp/rcvbundl.h                        

  > add microcode to support interrupt mitigation on the
  > 82551 F stepping chipset.
  > From FreeBSD via Dmitry Bogdan <dsb at imcs dot dvgu dot ru> (brad@)

  ~ fxp/fxp-license                       

  > add fxp-d102e to the list (brad@)

net

  ~ if_vlan.c                             ~ if_vlan_var.h

  > Use the IANA assignment IFT_L2VLAN.
  > From FreeBSD/NetBSD
  > Tested by camield@ and Alexey E. Suslikov <cruel at texnika dot com dot ua>
  > ok camield@ (brad@)

  ~ if_spppsubr.c                         

  > Fix cisco-mode check in lcp up/down. (canacar@)

== usr.bin =========================================================== 06/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin

cvs

  ~ commit.c                              

  > add missing CVS_CMD_ALLOWSPEC flag (joris@)

  ~ commit.c                              

  > don't send a Modified request and the file its contents when
  > it has been removed. (joris@)

== usr.sbin ========================================================== 07/07 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/usr.sbin

usr.sbin

  ~ Makefile                              

  > enter ztsscale (deraadt@)

tcpdump

  ~ ethertype.h                           

  > sync up, add some missing types (brad@)

ztsscale

  + ztsscale.c                            + Makefile

  > Import matthieu's touch screen calibration tool for zaurus.
  > ok deraadt@ (uwe@)

  ~ ztsscale.c                            

  > spacing (deraadt@)

  ~ Makefile                              + ztsscale.8

  > how to use ztsscale... (deraadt@)

  ~ ztsscale.c                            

  > - indentation
  > - do ratio calculations in double, not integer
  > - reduce allowed error to 1% (not more than 6 pixels off)
  > - add usage() (uwe@)

  ~ ztsscale.c                            

  > use the last position of the pen before it was lifted up (uwe@)

===============================================================================