[odc] Daily src changes for 2005-02-12

ODC auto at squish.net
Sun Feb 13 07:00:43 GMT 2005


OpenBSD src changes summary for 2005-02-12
==========================================

distrib/notes                           share/man
sys/arch/amd64/conf                     sys/arch/arm/xscale
sys/arch/hp300/dev                      sys/arch/hp300/hp300
sys/arch/hp300/include                  sys/arch/zaurus/conf
sys/dev/ic                              sys/dev/pci
sys/dev/usb                             

== distrib =========================================================== 01/03 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/distrib

notes

  ~ alpha/hardware                        ~ amd64/hardware
  ~ cats/hardware                         ~ i386/hardware
  ~ sparc64/hardware                      

  > Sync kue man page/notes with driver. (jsg@)

  ~ alpha/hardware                        ~ amd64/hardware
  ~ cats/hardware                         ~ i386/hardware
  ~ sparc64/hardware                      

  > Additional axe devices found in Linux driver. (jsg@)

== share ============================================================= 02/03 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/share

man

  ~ man4/kue.4                            

  > Sync kue man page/notes with driver. (jsg@)

  ~ man4/wi.4tbl                          ~ man4/atu.4

  > add a couple of devices i own
  > ok jsg@ (dlg@)

  ~ man4/axe.4                            

  > Additional axe devices found in Linux driver. (jsg@)

== sys =============================================================== 03/03 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/sys

arch/amd64/conf

  ~ GENERIC                               

  > enable bktr(4) as it works well; jakemsr at jakemsr.com4095 (pvalchev@)

arch/arm/xscale

  ~ files.pxa2x0                          

  > whitespace fix
  > ok drahn@ (dlg@)

  ~ pxa2x0_ohci.c                         

  > remove the need for duplicate knowledge between autoconfig and the driver.
  > ok drahn@ (dlg@)

  ~ pxa2x0reg.h                           

  > fix typo
  > ok drahn@ (dlg@)

arch/hp300/dev

  ~ apci.c                                ~ dca.c
  ~ dcm.c                                 

  > Use cons_decl() instead of rolling our own prototypes. (miod@)

arch/hp300/hp300

  ~ machdep.c                             

  > consinit_active is not used anymore. (miod@)

arch/hp300/include

  ~ autoconf.h                            

  > consinit_active is not used anymore. (miod@)

arch/zaurus/conf

  ~ GENERIC                               

  > remove the need for duplicate knowledge between autoconfig and the driver.
  > ok drahn@ (dlg@)

dev/ic

  ~ aic7xxx_openbsd.c                     ~ aic7xxx_openbsd.h

  > Fix crashes during probe by ensuring that SCSI_IS_SCSIBUS_B() returns
  > false until scsi bus b is initialized.
  > Set TWIN_CHNLB bit that is used elsewhere. Missed chunk from last code
  > sync.
  > Problem found and fixes tested on HP Proliant ML310 by Valov Oleg. (krw@)

dev/pci

  ~ ahc_pci.c                             

  > Fix crashes during probe by ensuring that SCSI_IS_SCSIBUS_B() returns
  > false until scsi bus b is initialized.
  > Set TWIN_CHNLB bit that is used elsewhere. Missed chunk from last code
  > sync.
  > Problem found and fixes tested on HP Proliant ML310 by Valov Oleg. (krw@)

dev/usb

  ~ usbdevs                               

  > Additional axe devices found in Linux driver. (jsg@)

  ~ usbdevs.h                             ~ usbdevs_data.h

  > regen (jsg@)

  ~ if_axe.c                              

  > Additional axe devices found in Linux driver. (jsg@)

===============================================================================



More information about the odc mailing list