[odc] Daily src changes for 2005-10-01

[ODC]

OpenBSD src changes summary for 2005-10-01
==========================================

libexec/ld.so                           share/man
sys/arch/mac68k/dev                     sys/arch/macppc/macppc
sys/arch/powerpc/include                sys/dev/mii
sys/dev/pci                             usr.bin/find
usr.bin/mixerctl                        

== libexec =========================================================== 01/04 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/libexec

ld.so

  ~ dlfcn.c                               ~ library.c
  ~ library_mquery.c                      ~ library_subr.c
  ~ resolve.c                             

  > handle references to load groups caused by dlopen()ing of depenant
  > members of the load group. work by kurt@ and myself (drahn@)

== share ============================================================= 02/04 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/share

man

  ~ man4/brgphy.4                         

  > add Broadcom BCM5462 (brad@)

  ~ man4/brgphy.4                         

  > add Broadcom BCM5421K2 (brad@)

  ~ man4/viasio.4                         

  > grammar; (jmc@)

== sys =============================================================== 03/04 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/sys

arch/mac68k/dev

  ~ esp.c                                 

  > simplifiy esp_dafb_have_dreq()
  > from NetBSD (martin@)

arch/macppc/macppc

  ~ cpu.c                                 

  > Recognize 970 processor and provide a function/variable to determine if
  > the current processor is 64bit. (drahn@)

arch/powerpc/include

  ~ cpu.h                                 

  > Recognize 970 processor and provide a function/variable to determine if
  > the current processor is 64bit. (drahn@)

dev/mii

  ~ miidevs.h                             

  > regen (brad@)

  ~ miidevs                               

  > add the Broadcom BCM5462 PHY found in the Apple Vesta PHY IC in the iMac
  > G5. (brad@)

  ~ brgphy.c                              

  > add Broadcom BCM5462 (brad@)

  ~ brgphy.c                              

  > load the BCM5401 DSP code for rev 0 and not rev 1.
  > From: Linux sungem_phy driver. (brad@)

  ~ miidevs.h                             

  > regen (brad@)

  ~ brgphy.c                              

  > add Broadcom BCM5421K2 (brad@)

  ~ miidevs                               

  > add the Broadcom BCM5421K2 PHY found in the Apple K2 IC in the G5. (brad@)

dev/pci

  ~ if_de.c                               

  > fix some comments and put if_devar.h include where it belongs (martin@)

  ~ if_de.c                               

  > oops, the include was just doing fine there (martin@)

  ~ pcidevs.h                             ~ pcidevs_data.h

  > regen (brad@)

  ~ pcidevs                               

  > add a Broadcom BCM5701 with a Apple vendor id.
  > From Linux tg3 driver (brad@)

  ~ pcidevs.h                             ~ pcidevs_data.h

  > regen (brad@)

  ~ pcidevs                               

  > better names for Apple GMAC's. (brad@)

  ~ if_gem_pci.c                          

  > update names. (brad@)

  ~ if_em.c                               

  > remove return at the end of void function. (brad@)

== usr.bin =========================================================== 04/04 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin

find

  ~ find.1                                

  > Fix description of -flags. Noted by Magnus Ehman in PR 4527. ok jmc@
  > jaredy@ (otto@)

mixerctl

  ~ mixerctl.1                            ~ mixerctl.c

  > toggle support from janus at area319.de. was unsure, but a few other
  > people found this very useful (deraadt@)

===============================================================================