[odc] Daily src changes for 2007-12-07

ODC auto at squish.net
Sat Dec 8 07:00:01 GMT 2007


OpenBSD src changes summary for 2007-12-07
==========================================

distrib/sets                            etc/Makefile
etc/changelist                          etc/ftpusers
etc/group                               etc/hoststated.conf
etc/master.passwd                       etc/rc
etc/rc.conf                             etc/relayd.conf
share/man                               sys/arch/sgi/sgi
sys/arch/sparc64/dev                    sys/dev/acpi
sys/dev/ic                              sys/dev/pci
sys/dev/usb                             usr.sbin
usr.sbin/acpidump                       usr.sbin/hoststatectl
usr.sbin/hoststated                     usr.sbin/ntpd
usr.sbin/relayctl                       usr.sbin/relayd
usr.sbin/snmpd                          

== distrib =========================================================== 01/05 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/distrib

sets

  ~ lists/base/mi                         ~ lists/etc/mi
  ~ lists/man/mi                          

  > sync (deraadt@)

== etc =============================================================== 02/05 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/etc

Makefile

  ~ Makefile                              

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

changelist

  ~ changelist                            

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

ftpusers

  ~ ftpusers                              

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

group

  ~ group                                 

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

hoststated.conf

  - hoststated.conf                       

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

master.passwd

  ~ master.passwd                         

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

  ~ master.passwd                         

  > oops, _relayd not _relay; spotted by reyk (deraadt@)

rc

  ~ rc                                    

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

rc.conf

  ~ rc.conf                               

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (deraadt@)

relayd.conf

  ~ relayd.conf                           

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (reyk@)

== share ============================================================= 03/05 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/share

man

  ~ man4/ral.4                            

  > new RT2860 firmware.
  > IMPORTANT: you will need to reboot your machine for the new firmware to be
  > loaded because the firmware is loaded only once.  for cardbus/expresscard,
  > unplugging/plugging the adapter should be enough though. (damien@)

== sys =============================================================== 04/05 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/sys

arch/sgi/sgi

  ~ machdep.c                             

  > Clean up comments - typos, grammatical errors and style(9). (jsing@)

arch/sparc64/dev

  ~ sbus.c                                

  > unify a function name compared to other busses (deraadt@)

dev/acpi

  ~ acpiec.c                              ~ acpimadt.c

  > do not call aml_searchname and aml_evalnode afterwards, just use
  > aml_evalname. marco@ ok. (fgsch@)

dev/ic

  ~ rt2860.c                              ~ rt2860reg.h
  ~ rt2860var.h                           

  > In hostap mode, update beacon to reflect ERP IE changes.
  > Fix channel 126 settings.
  > Workarounds for various hardware bugs. (damien@)

  ~ rt2860.c                              ~ rt2860reg.h
  ~ rt2860var.h                           

  > LEDs (damien@)

dev/pci

  ~ agp.c                                 ~ agpvar.h

  > Replace lockmgr with rwlock.
  > advice from thib. Comments and ok tedu@ (oga@)

  ~ agp.c                                 ~ agp_amd.c
  ~ agp_i810.c                            ~ agp_intel.c
  ~ agp_sis.c                             ~ agp_via.c
  ~ agpreg.h                              ~ agpvar.h

  > KNF, no binary change.
  > Looked over by a few people. (oga@)

dev/usb

  ~ usbdevs.h                             ~ usbdevs_data.h

  > sync (deraadt@)

  ~ usbdevs                               ~ if_zyd.c

  > more zydas versions, collected from various places (deraadt@)

  ~ usbdevs.h                             ~ usbdevs_data.h

  > sync (damien@)

  ~ usbdevs                               

  > add a bunch of ralink rt2870 ids (3 new vendors / 38 new products)
  > from ralink linux driver. (damien@)

  ~ usbdevs                               

  > shorted names (deraadt@)

  ~ usbdevs.h                             ~ usbdevs_data.h

  > sync (deraadt@)

== usr.sbin ========================================================== 05/05 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/usr.sbin

usr.sbin

  ~ Makefile                              

  > enter relayd/relayctl instead of hoststated/hoststatectl (deraadt@)

acpidump

  ~ asl_dump.c                            

  > implement a few more opcodes from acpi 3.0 and fix output in some cases.
  > dell d620 now shows the tree correctly. marco@ ok. (fgsch@)

hoststatectl

  - Makefile                              - hoststatectl.8
  - hoststatectl.c                        - parser.c
  - parser.h                              

  > hoststated/hoststatectl get repository copied (and de-tagged) into
  > relayd/relayctl.  This is a more suitable place for a daemon that has
  > grown out of it's initial roots of "monitoring and redirecting services
  > at various layers", into one that is "a full featured proxy, which
  > happens to know what is up/down" (deraadt@)

hoststated

  - Makefile                              - buffer.c
  - carp.c                                - check_icmp.c
  - check_script.c                        - check_tcp.c
  - control.c                             - hce.c
  - hoststated.8                          - hoststated.c
  - hoststated.conf.5                     - hoststated.h
  - imsg.c                                - log.c
  - name2id.c                             - parse.y
  - pfe.c                                 - pfe_filter.c
  - relay.c                               - relay_udp.c
  - ssl.c                                 - ssl_privsep.c

  > hoststated/hoststatectl get repository copied (and de-tagged) into
  > relayd/relayctl.  This is a more suitable place for a daemon that has
  > grown out of it's initial roots of "monitoring and redirecting services
  > at various layers", into one that is "a full featured proxy, which
  > happens to know what is up/down" (deraadt@)

ntpd

  ~ ntpd.8                                

  > document adjfreq(2);
  > based on an initial diff from Simon Kuhnle,
  > and input from Joerg Sonnenberger;
  > ok otto (jmc@)

relayctl

  ~ Makefile                              ~ parser.c
  ~ relayctl.8                            ~ relayctl.c

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (reyk@)

  ~ relayctl.8                            

  > adjust the manpages to use "Relay daemon" (reyk@)

relayd

  ~ Makefile                              ~ buffer.c
  ~ carp.c                                ~ check_icmp.c
  ~ check_script.c                        ~ check_tcp.c
  ~ control.c                             ~ hce.c
  ~ imsg.c                                ~ log.c
  ~ name2id.c                             ~ parse.y
  ~ pfe.c                                 ~ pfe_filter.c
  ~ relay.c                               ~ relay_udp.c
  ~ relayd.c                              ~ relayd.h
  ~ ssl.c                                 

  > hoststated gets renamed to relayd.	easier to type, and actually says
  > what the daemon does - it is a relayer that pays attention to the status
  > of pools of hosts; not a status checkers that happens to do some relaying
  > (reyk@)

  ~ relayd.8                              ~ relayd.conf.5

  > partial update of the man pages to new relayd name (deraadt@)

  ~ relayd.conf.5                         

  > adjust the manpages to use "Relay daemon" (reyk@)

snmpd

  ~ snmpe.c                               

  > unbreak snmpd on 32bit archs like i386 (reyk@)

  ~ ber.c                                 ~ snmpd.h
  ~ snmpe.c                               

  > add a new 'd' format to ber_printf_elements to pass ints instead of
  > long longs; you have to pass the right type with vargs. this finally
  > fixes the previous problem on i386.
  > discussed with claudio (reyk@)

  ~ ber.c                                 

  > comparison betweem signed and unsigned (reyk@)

  ~ mps.c                                 

  > type (reyk@)

  ~ parse.y                               

  > remove unreduced rules (reyk@)

===============================================================================



More information about the odc mailing list