[odc] Daily src changes for 2008-03-27

[ODC]

OpenBSD src changes summary for 2008-03-27
==========================================

share/man                               sys/arch/sgi/localbus
sys/arch/sgi/sgi                        sys/arch/sgi/stand/boot
sys/dev/i2c                             sys/dev/pci
usr.bin/ssh                             

== share ============================================================= 01/03 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/share

man

  ~ man4/Makefile                         ~ man4/pci.4
  + man4/kate.4                           

  > kate(4) manual page (cnst@)

  ~ man4/man4.sgi/gbe.4                   ~ man4/man4.sgi/macebus.4
  ~ man4/man4.sgi/mavb.4                  ~ man4/man4.sgi/mec.4
  ~ man4/man4.sgi/mkbc.4                  

  > Bring the synopsis sections of various sgi man pages into line with direct
  > configuration.
  > ok miod@ (jsing@)

  ~ man4/man4.mvme68k/ie.4                ~ man4/man4.mvme68k/le.4

  > no sense for devices to reference other (same type) devices;
  > requested by deraadt/miod (jmc@)

== sys =============================================================== 02/03 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/sys

arch/sgi/localbus

  ~ com_lbus.c                            

  > Majorly cleanup/overhaul com @ macebus code.
  > ok miod@ (jsing@)

arch/sgi/sgi

  ~ clock_md.c                            

  > Data mode can only be changed when updating the clock, so don't bother
  > trying to change to BCD mode before reading. Also, don't assume that the
  > clock is in 24 hour mode when updating.
  > tested jasper@, ok miod@ (jsing@)

arch/sgi/stand/boot

  ~ arcbios.c                             

  > Remove unwanted code and sync with mips64/arcbios.c.
  > ok miod@ (jsing@)

dev/i2c

  ~ i2c_scan.c                            

  > test the Vdd registers of Andigilog chips against the minimum voltage
  > readings;
  > 'good plan' deraadt;  ok kettenis, mikeb (cnst@)

dev/pci

  ~ files.pci                             + kate.c

  > welcome kate(4), a new driver supporting AMD K8 temperature sensors
  > discussed with deraadt and others
  > tested by jasper, deraadt, todd and others (cnst@)

  ~ kate.c                                

  > update the revision cpuid table, removing three duplicate ids from "JH-F"
  > and adding two missing ids for Mobile AMD Sempron rev DH-G2; tested todd
  > (cnst@)

  ~ jmb.c                                 

  > add detach support. this has to be the easiest diff for hotplug ever, go
  > read it :)
  > ok kettenis@ jsg@ (dlg@)

== usr.bin =========================================================== 03/03 ==

  http://www.openbsd.org/cgi-bin/cvsweb/src/usr.bin

ssh

  ~ version.h                             

  > openssh-4.9 (djm@)

  ~ sshd.8                                

  > remove trailing whitespace; (jmc@)

===============================================================================